Hi,
I have just purchased a sony DVP-NS78 DVD player. This player requires an One4All remote to send the codes. Is there a program that emulates this remote on the nokia?
The following was taken from
[Only Registered and Activated Users Can See Links. Click Here To Register...]
1.Turn off the DVD player. (The DVP-NS76H has no standby mode, so will turn itself off completely)
2.Select 'DVD' device on remote.
3.Hold 'MAGIC' button until red light blinks twice.
4.Enter the Sony device code 0533. The remote will now be able to control the DVD player.
5.Now you have to program buttons 1 to 5 with the following codesThese codes will override the chip in the DVD player making it Multi-region)
1)00189
2)00255
3)00095
4)00221
5)00079
4.Firstly Hold 'MAGIC' button until red light blinks twice.
5.Type 994. (This will tell the controller you are programming individual buttons)The red light blinks twice again.
6.Press 'MAGIC' again. The red light will blink once
7.Enter one of the 5 digit codes from above followed by the button number you are assaining it to(eg MAGIC + 00189 + 1) The red light blinks twice.
8.NB. YOU MUST REPEAT STEP 4-6 BEFORE YOU TYPE IN EVERY CODE .
9.After all codes have been entered (1-5), with the DVD player off, Press 1,2,3,4,5 on the One4All remote and the DVD player should start up and the word "SUCCESS" scrolls along the display window.
10.I didn't have to but you can Press 1,2,3,4,5 - and the player shuts down and now works fine on any region code!
Thank You
